Written Ergonomics Program
for (Name of Company)

1. 	INTRODUCTION

	Ergonomics is the study of people and their interaction with the elements of their job or task including equipment, tools, facilities, processes, and environment.  It is a multidisciplinary field of study integrating industrial psychology, engineering, medicine, and design.

	In a more practical sense, ergonomics is the science of human comfort.  When aspects of the work or workplace insult the human body, the result is often a musculoskeletal disorder (MSD).  To help avoid MSDs, work demands should not exceed the physical capabilities of the worker.  MSDs are also known by several other names including:

			CTDs (cumulative trauma disorders)
			RSIs (repetitive stress or repetitive strain injuries)
			RMIs (repetitive motion injuries)
			Overuse syndrome

	The most common, recognizable name for MSDs is cumulative trauma disorders or CTDs.  Whatever the name used, these injuries belong to a family or group of wear and tear illnesses that can affect muscles, nerves, tendons, ligaments, joints, cartilage, blood vessels or spinal discs of the body.  MSDs do not include slips, trips and falls, cuts, motor vehicle accidents or other similar accidents; although a close look at the reasons for acute injuries often reveals design problems that can be corrected.

2.	POLICY

	It is the policy of (Name of Company) to provide all employees with a safe and healthy workplace.  A proactive ergonomics program is integrated into our company’s written safety and health program.

	Records documenting the identification, prevention, and control of employee exposure to ergonomic risk factors will be maintained pursuant to all regulations.

	This program is a collaborative effort that includes managers, supervisors, and labor. The Ergonomics Program Coordinator is responsible for the program’s implementation, management, and recordkeeping requirements.

3.	ERGONOMICS PROGRAM

	The purpose of an ergonomics program is to apply ergonomic principles to the workplace in an effort to reduce the number and severity of MSDs, thus decreasing workers’ compensation claims and, where possible, increase productivity, quality, and efficiency.  An ergonomically sound work environment maximizes employee comfort while minimizing the risk of undue physical stress.

	A proactive approach focuses on making changes when risks have already been identified, as well as to incorporate ergonomics into the design phase of a new facility or process, into purchasing new equipment or tools, and into the contemplation of scheduling changes.  (Name of Company) has such a program which includes the following components:

A. 	Management Leadership.  The management of (Name of Company) is committed to the ergonomics process.  Management supports the efforts of the Ergonomics Program Coordinator and the Ergonomics Committee by pledging financial and philosophical support for the identification and control of ergonomic risk factors.  Management will support an effective MSD reporting system and will respond promptly to reports.  Management will regularly communicate with employees about the program.

B. 	Employee Participation.  An essential element to the success of the ergonomics program, employees will be solicited for their input and assistance with identifying ergonomic risk factors, worksite evaluations, development and implementation of controls, and training.  Employee participation in the program will occur only during company time.

	C.	Identification of Problem Jobs.  Collecting data that identifies injury and illness trends is called surveillance.  Surveillance can be either passive or active.  Conducting a records review is an example of passive surveillance, which looks at existing data such as OSHA Logs, workers’ compensation claims, trips to the medical facility, and absentee records.  Active surveillance uses observations, interviews, surveys, questionnaires, checklists, and formal worksite evaluation tools to identify specific high-risk activities.  (Name of Company) will be using both passive and active surveillance to identify problem jobs.

	D.	Worksite Evaluations.
	
(1) 	Triggers for a worksite evaluation:

(a) 	When an employee reports an MSD sign or symptom.
(b) 	Jobs, processes, or work activities where work-related ergonomic risk factors have been identified which may cause or aggravate MSDs.
(c) 	Any change of jobs, tasks, equipment, tools, processes, scheduling, or changes in work shift hours (for example, going from a traditional 5-day, 8 hour shift to a compressed 4-day, 10 hour shift).
(d) 	When a safety walk-through or scheduled inspection or survey has uncovered potential MSD hazards.

		(2)	Work-related risk factors to be considered in the evaluation process include, but are not limited to:

(a) 	Physical risk factors including force, postures (awkward and static), static loading and sustained exertion, fatigue, repetition, contact stress, extreme temperatures, and vibration.
(b) 	Administrative issues including job rotation/enlargement, inadequate staffing, excessive overtime, inadequate or lack of rest breaks, stress from deadlines, lack of training, work pace, work methods, and pyschosocial issues.
(c) 	Environmental risk factors including noise, lighting, glare, air quality, temperature, humidity, and personal protective equipment and clothing.
(d) 	Combination of risk factor such as, but not limited to, highly repetitive, forceful work with no job rotation or precision work in a dimly lit room.

E. 	Setting Priorities.  Worksite evaluations will be scheduled based upon the following:

(1) 	Any job, process, operation, or workstation which has contributed to a worker’s current MSD;
(2) 	A job, process, operation, or workstation that has historically contributed to MSDs; and
(3) 	Specific jobs, processes, operations, or workstations that have the potential to cause MSDs.

F. 	Worksite Evaluations Methods.  Various methods will be used to evaluate problem jobs including:

(1) 	Walk-through and observations
(2) 	Employee interviews
(3) 	Surveys and questionnaires
(4) 	Checklists
(5) 	Detailed worksite evaluations

G. 	Control of the Ergonomic Risk Factors.  (Name of Company) will take steps to identify ergonomic risk factors and reduce hazards by using a three-tier hierarchy of control (in order of preference):

(1) 	Engineering controls.  The most desirable and reliable means to reduce workplace exposure to potential harmful effects.  This is achieved by focusing on the physical modifications of jobs, workstations, tools, equipment, or processes.

(2) 	Administrative controls.  This means controlling or preventing workplace exposure to potentially harmful effects by implementing administrative changes such as job rotation, job enlargement, rest breaks, adjustment of pace, redesign of methods, and worker education.

		(3)	Personal protective equipment (PPE).  Not recognized as an effective means of controlling hazards and does not take the place of engineering or administrative controls.  Acceptable forms of PPE include kneepads and various types of gloves including anti-vibration.

H. 	Training.  Training is intended to enhance the ability of managers, supervisors, and employees to recognize work-related ergonomic risk factors and to understand and apply appropriate control strategies.  Training in the recognition and control of ergonomic risk factors will be given as follows:

(1) 	To all new employees during orientation.
(2) 	To all employees assuming a new job assignment.
(3) 	When new jobs, tasks, tools, equipment, machinery, workstations, or processes are introduced.
(4) 	When high exposure levels to ergonomic risk factors have been identified.

		The minimum for all managers, supervisors, and employees will include the following elements:

(1) 	An explanation of (Name of Company) ergonomics program and their role in the program;
(2) 	A list of the exposures which have been associated with the development of MSDs;
(3) 	A description of MSD signs and symptoms and consequences of injuries caused by work and non work-related risk factors;
(4) 	An emphasis on the importance of early reporting of MSD signs and symptoms and injuries to management, and;
(5) 	The methods used by (Name of Company) to minimize work and non work-related risk factors.

		Training will be provided in one, or in a combination, of the following formats:

(1) 	Oral presentations
(2) 	Videos
(3) 	Distribution of educational literature
(4) 	Hands-on equipment and work practice demonstrations

		Trainers will be experienced in delivering training programs that address all work and non work-related risk factors, and well be familiar with (Name of Company) operations.  Training will be provided from one, or a combination, of the sources listed below:

(1) 	Internally developed resources
(2) 	The workers’ compensation carrier
(3) 	An outside consultant

		All training will be documented:

(1) 	All employees will be required to sign a training sign-in roster.

	I.	MSD (Medical) Management and Early Return to Work.

		Pursuant to the law, (Name of Company) provides medical care to all employees injured at work.  (Name of Company) maintains a good working relationship with our medical care provider, (Name of Medical Facility).  All work-related injuries and illnesses will be referred to (Name of Medical Facility) unless the injured employee has notified (Name of Company) in writing that other provisions have been made prior to an injury or illness.

		In the event of a work-related injury or illness, the health care provider/professional will:

(1) 	provide diagnosis and treatment for (Name of Company) employees;
(2) 	determine if reported MSD signs or symptoms are work-related;
(3) 	comply with (Name of Company) Early Return to Work program by recommending restricted, modified, or transitional work duties when appropriate;
(4) 	refer (Name of Company) injured employees to other clinical resources for therapy or rehabilitation;
(5) 	Provide (Name of Company) with timely work status reports, and;
(6) 	Develop a positive working relationship with (Name of Company) workers’ compensation carrier, (Name of Workers’ Compensation Carrier).

		(Name of Company) has an aggressive Early Return to Work program and will offer return to work opportunities to all injured employees in accordance with work restrictions identified by a recognized medical provider.

	J.	Program Evaluation and Follow-Up.  In order to ensure that issues have been addressed and that new problems have not been created, monitoring and evaluation will be conducted on an on-going basis.  The methods include use of individual interviews and checklists to reevaluate the job/task to ensure that risks have been reduced, minimized, or eliminated.

4.	INDIVIDUAL RESPONSIBILITIES

A. 	Ergonomics Program Coordinator.  The Ergonomics Program Coordinator will report directly to upper management and be responsible for this policy and program.  All evaluations, controls, and training will be coordinated under the direction of the Ergonomics Program Coordinator in collaboration with Management.  The Ergonomics Program Coordinator will monitor the results of the program to determine additional areas of focus as needed.

	The Ergonomics Program Coordinator will:

(1) 	ensure that evaluators performing worksite evaluations and training are properly trained;
(2) 	ensure that control measures are implemented in a timely manner;
(3) 	ensure that a system is in place for employees to report MSD signs or symptoms and suspected work-related risk factors to managers and supervisors;
(4) 	ensure that accurate records are maintained and provide documentation upon request;
(5) 	schedule manager, supervisor, and employee training and maintain records to include date, name of instructor, topic, and materials used, and;
(6) 	monitor the program on a quarterly basis and provide an annual review.

B. 	Managers.  Duties of all managers will include:

(1) 	accountability for the health and safety of all employees within their departments through the active support of the ergonomics program;
(2) 	allocating human and/or financial resources;
(3) 	attending ergonomics training to familiarize themselves with the elements of the program, recognition and control of work-related ergonomic risk factors, MSD signs and symptoms, early reporting requirements and procedures, and medical management;
(4) 	ensuring that supervisors and employees have received the appropriate training;
(5) 	ensuring that ergonomics practices and principles are considered when conducting worksite evaluations, and;
(6) 	nsuring that recommended controls are implemented and/or used appropriately.

C. 	Supervisors.  Duties of all supervisors will include:

(1) 	attending ergonomics training to familiarize themselves with the elements of the program, recognition and control of work-related ergonomics risk factors, MSD signs and symptoms, early reporting requirements and procedures, and medical management;
(2) 	ensuring that employees have received the appropriate training;
(3) 	ensuring that employees are provided with and use the appropriate tools, equipment, parts, and materials in accordance with ergonomic requirements;
(4) 	ensuring that employees understand the MSD signs and symptoms and early reporting system;
(5) 	responding promptly to employee reports;
(6) 	providing appropriate workers’ compensation documentation to employees as required by all regulations;
(7) 	seeking clarification from Human Resources when return to work directives from the healthcare provider/professional are unclear, and;
(8) 	maintaining clear communication with managers and employees.

D. 	Employees.  Every employee of (Name of Company) is responsible for conducting himself/herself in accordance with this policy and program.  All employees will:

(1) 	when provided, use the appropriate tools, equipment, parts, materials, and procedures in the manner established by managers and supervisors;
(2) 	ensure that equipment is properly maintained in good condition and when not, reported immediately;
(3) 	attend ergonomics training as required and apply the knowledge and skills acquired to actual jobs, tasks, processes, and work activities;
(4) 	report MSD signs or symptoms and work-related MSD hazards to the supervisor as early as possible to facilitate medical treatment and proactive interventions, and;
(5) 	take responsibility in their personal health and safety.

5.	ANNUAL PROGRAM REVIEW

	The Ergonomics Program Coordinator will conduct an annual program review to assess the progress and success of the program.  The review will consider the following:

(1) 	Evaluation of all training programs and records.
(2) 	The need for retraining of managers, supervisors, and employees.
(3) 	The jobs, processes, or operations which have produced a high incidence rate of work-related MSDs.
(4) 	The length of time between a request for an ergonomic evaluation and the actual evaluation.
(5) 	The length of time between the point at which the results of the evaluation are known and when implementation of controls begins.
(6) 	The length of time between the beginning and completion of implementation of controls.
(7) 	The program’s success based upon comparison to previous years using the following criteria:

(a) 	Number and type of lost workdays associated with OSHA recordable cases.
(b) 	Cost of workers’ compensation cases.
(c) 	Employee feedback through direct interviews, walk-through observations, written surveys and questionnaires, and reevaluations.

General Ergonomics Training

Advanced Ergonomics Training

Employee Participation/Feedback

Ongoing monitoring of the program

Continue to refine solutions

Measure all effects of the changes
Productivity	Injury Rates
Quality	Discomfort

Long-Term Solutions

Short-Term Solutions

Employee Participation Feedback 
Employee Participation/Feedback

Implement the changes

Develop
and implement solutions

Active Surveillance

Passive Surveillance

Identify and select high-risk jobs, processes, and/or operations

Identify an Ergonomics Program Coordinator
Form an ergonomics task force or team
Solicit employee participation

Upper Management Leadership

Identify possibilities of modified work

Perform worksite evaluations

Establish realistic goals and an action plan
Create a living document